Products

Home > Products> Pressure Calibrators

Pressure Calibrators

Pressure Test & Calibration Pumps
The Rapid Pressure Instrument Verification Device is mainly used for calibrating analog pressure gauges, electric contact pressure gauges, pressure sensors, differential pressure sensors, pressure-sensitive elements and pressure transmitters, and can rapidly generate set pressure values.
Designed and manufactured in full compliance with relevant national, industrial and corporate standards, it serves as process and test equipment for pressure instruments. It is widely used in pressure gauge manufacturers, product quality inspection institutes, research institutes, universities, third-party testing organizations and other institutions for factory inspection and on-site calibration of various pressure instruments.

Product detail

I. IQS10X Portable (Laboratory) Manual Pressure Pump

Product Introduction

The manual pressure pump is designed for both laboratory and on-site use. It features an open, transparent design with simple operation, smooth pressurization and depressurization, fine adjustment resolution, easy maintenance, and reliable leak resistance.
The built-in gas-liquid separator and carefully designed exhaust valve effectively prevent contamination of the pump body. A unique precision shut-off valve ensures pressure stability throughout the calibration process. A safety pin is installed at the pressure/vacuum switching point to effectively prevent the switching valve from shifting during pressurization.
The uniquely designed M20×1.5 female-thread quick connectors allow fast installation and removal of pressure instruments without wrenches or PTFE tape. The ergonomically designed pressure lever structure delivers labor-saving pressure generation, making your calibration work more efficient.

Manual Pressure Pump Model Selection

表格
OptionIQS101 Manual Micro-pressure PumpIQS102 Manual Pneumatic PumpIQS103 Manual Hydraulic Pump
Pressure Generation Range(-95 ~ 700) kPa(-0.095 ~ 2.5 / 6 / 16) MPa(0 ~ 60 / 160 / 250) MPa
Adjustment Fineness0.01 Pa0.01 kPa0.1 kPa
Pressure MediumAirAirWater / Oil
Dimensions251 × 160 × 150 mm320 × 215 × 160 mm / 460 × 350 × 200 mm300 × 530 × 215 mm
Weight1.0 kg2.1 kg / 6 kg3.9 kg / 16 kg
Pressure ConnectionM20×1.5 female (2 ports)M20×1.5 female (2 / 3 ports)M20×1.5 female (2 / 3 ports)

II. IQS63X Manual Rapid Verification Device for Pressure Instruments

Main Features

Replaces traditional manual pressure pumps. Features simple operation, labor-saving design, rapid pressure stabilization, and excellent cost-performance ratio.

Solution Overview

The Rapid Pressure Instrument Verification Device is mainly used for calibrating analog pressure gauges, pressure sensors, differential pressure sensors, pressure-sensitive elements and pressure transmitters, and can rapidly generate set pressure values.
Designed and manufactured in full compliance with relevant national, industrial and corporate standards, it serves as process and test equipment for pressure instruments. It is widely used in pressure gauge manufacturers, product quality inspection institutes, research institutes, universities, third-party testing organizations and other institutions for factory inspection and on-site calibration of various pressure instruments.

Solution Features

  • Built-in rechargeable lithium battery

  • Built-in electric pump and pressure regulation device

  • Three-in-one pressure control valveintegrating intake, shut-off and pressure release

  • High-pressure and low-pressure pressure regulating valves

  • Five-fold protectionon the current control board: overcurrent protection, short-circuit protection, low-voltage protection, overcharge protection, and temperature control

  • Hydraulic system:External liquid reservoir with automatic liquid suction and automatic blowdown to keep pipelines clog-free

  • 4 × M20×1.5 female-thread output ports

Technical Model Selection

表格
OptionIQS630 / IQS636 Pneumatic Rapid Verification SolutionIQS639 Hydraulic Rapid Verification Solution
Pressure Control Range(-0.095 ~ 0) MPa / (0 ~ 0.6) MPa (optional)(0 ~ 6) MPa
Pressure Control Stability< 0.005% FS< 0.005% FS
Pressure MediumAirWater
Dimensions370 × 310 × 130 mm300 × 530 × 215 mm
Weight5 kg5 kg
Working Connection PortM20×1.5 male (4 ports)M20×1.5 male (4 ports)
Air SourceBuilt-in air sourceBuilt-in air source


Related Recommendations

view more